The frame of every USM Haller is made up of two components: sturdy chrome-plated steel tubes and ingenious chromed brass connector balls holding the tubes together. Most of the flat panels in the system are made of sheet steel, sprayed in your choice of one of the 14 classic USM colours.
Various finishes and colours are available for the USM Haller’s panels, including glass and perforated steel.
The frame of the USM Haller system is only available in the classic chrome finish.
No. Delivery and installation are fully handled by our expert team. They will deliver it at a time that’s convenient for you and assemble it in position to your satisfaction. They won’t leave until you’re happy with your new furniture’s position, and they won’t leave any trace of their work behind them.
If you live close to one you have the choice of visiting a showroom, or one of our approved dealer partners to work on designs for your furniture and place an order.
Find your nearest dealer or contact us directly by clicking below.
Depending on your order, between six and ten weeks.
When you place your order you’ll be able to select a date that suits you in the available delivery window. We’ll deliver in the morning or afternoon, according to your preference.
For all table finishes and for USM Haller:
- For dry cleaning, use a dust cloth *.
- For wet cleaning, preferably use a soft fabric cloth * or chamois leather; moisten it with water and wring it out thoroughly before placing it on the surface of the cabinet.
In the case of heavy soiling, only use diluted neutral detergent (pH <9).
Never leave the surface long wet, let alone wet, to avoid the risk
Never use sponges or abrasive detergents. Some microfiber cloths may also have an abrasive effect.
Never use solvents.
For the finishes of oiled veneer tables:
To maintain and restore shine to table finishes, we recommend oiling them every 4 to 12 months depending on use.
1. Remove superficial dirt.
2. Pass a lightly moistened cloth over the top of the table.
3. Using a cloth *, apply a thin coat of oil.
4. Then polish the surface to dry completely.
For USM Privacy Panels and USM Inos Box:
For dry cleaning, remove dust and surface dirt with a vacuum cleaner that does not have a brush.
Metal or plastic parts can be cleaned with a damp cloth *.
For wet cleaning, in the presence of encrusted dirt, use a damp cloth * and, if necessary, a mild cleaner (eg window cleaner). Rub very gently so as not to damage the surface.
In case of wear or tear, do not pull the fibers that protrude. To avoid aggravating the defect, it is recommended to carefully cut the affected fibers.
* We recommend the USM cloth.
We’re ready and waiting to work with you on your dream furniture designs. Call us during office hours for additional product information or to arrange a design consultation.
Have questions? Whatever they are, email us today and you’ll get a response from our team within 4 working hours (but usually quicker).
Enter your postcode to find your local USM showroom or dealership. If we’re not in your area, we can get in touch to talk about the best way for you to get USM.
We’re ready and waiting to work with you on your dream furniture designs. Call us during office hours for additional product information or to arrange a design consultation.+41 31 720 72 72
Enter your postcode to find your local USM showroom or dealership. If we’re not in your area, we can get in touch to talk about the best way for you to get USM.Find a showroom